Make Space for Trade
A complete ecosystem of trade products — ladder racks, conduit, awnings and more. Designed to work as hard as you do.
Whether you're an electrician, plumber, builder or handyman — Rhino-Rack has world-class ladder carrying solutions designed to get you to the job safely and efficiently. From vans to 4WDs, SUVs and utes, our range fits more than 8,000 vehicles across every roof type on the market.
Choose from four proven systems, all constructed from non-corrosive materials, capable of withstanding extreme environments and weather conditions, and Australian designed and built.
LADDER AND ROOF RACK VEHICLE PACKAGES
Toyota HiAce Gen6 (H300)
Tech Twin Ext Ladder Pack with Conduit — Toyota HiAce Gen6 (H300) 19+
Includes: 3× Heavy Duty crossbars, leg & fitment kit, 2× Multi-Slide extension ladder racks, conduit
SKU:710-RSL-00004
Toyota HiAce Gen6 (H300)
Tech Ext & Step Ladder Pack with Conduit — Toyota HiAce Gen6 (H300) 19+
Includes: 3× Heavy Duty crossbars, leg & fitment kit, extension + step ladder rack combo, conduit.
SKU:710-RSL-00005
Toyota HiAce Gen6 (H300)
Tech Twin Ext Ladder Pack — Toyota HiAce Gen6 (H300) 19+
Includes: 3× Heavy Duty crossbars, leg & fitment kit, 2× Multi-Slide extension ladder racks (no conduit).
SKU:710-RSL-00006
Toyota HiAce Gen6 (H300)
Tech Ext & Step Ladder Pack — Toyota HiAce Gen6 (H300) 19+
Includes: 3× Heavy Duty crossbars, leg & fitment kit, extension + step ladder rack combo (no conduit).
SKU:710-RSL-00007
Toyota RAV4 Gen5 (XA50)
Tech Ladder Pack — Toyota RAV4 Gen5 (XA50) 2019–2025
Includes: Sportz crossbar, low-profile locking leg system, fitment kit, 2.2m Slide Out Ladder Rack.
SKU:710-RSL-00001
Toyota RAV4 Gen6 (XA60)
Tech Ladder Pack — Toyota RAV4 Gen6 (XA60) 2026+
Includes: Sportz crossbar, low-profile locking leg system, fitment kit, 2.2m Slide Out Ladder Rack.
SKU:710-RSL-00013
Ford Everest Gen3 (U704)
Tech Ladder Pack — Ford Everest Gen3 (U704) 2022+ Includes: Sportz crossbar, low-profile locking leg system, fitment kit, 2.2m Slide Out Ladder Rack.
SKU:710-RSL-00011
Kia Sportage Gen4 (QL)
Tech Ladder Pack — Kia Sportage Gen4 (QL) 2016–2021 Includes: Sportz crossbar, low-profile locking leg system, fitment kit, 2.2m Slide Out Ladder Rack.
SKU:710-RSL-00002
Hyundai Tucson Gen4 (NX4)& Kia Sportage Gen5 (NQ5)
Tech Ladder Pack — Hyundai Tucson Gen4 (NX4) 2021+ & Kia Sportage Gen5 (NQ5) 2022+ Includes: Sportz crossbar, low-profile locking leg system, fitment kit, 2.2m Slide Out Ladder Rack.
SKU:710-RSL-00012
Ford Ranger (PX/PX2/PX3)
Tech Ext Ladder Pack with Conduit — Ford Ranger (PX/PX2/PX3) 2011–2022 with ARB Canopy
Includes: 3× Sportz crossbars, leg & fitment kit, Multi-Slide extension ladder rack, conduit.
SKU:710-RSL-00008
Ford Ranger Gen 3 (PX/PX2/PX3)
Tech Ext Ladder Pack with Conduit — Ford Ranger Gen 3 (PX/PX2/PX3) 11-22 AND Gen 4 (P703) 22 On (Excl. Bar & Leg)
Includes: RLKS spacers & adaptors for RLKVA leg system, Multi-Slide extension ladder rack, conduit.
SKU:710-RSL-00010
Toyota Hilux Gen 8 (N80)
Tech Ext Ladder Pack with Conduit — Toyota Hilux Gen 8 (N80) 15-25 AND Gen 9 (N90) 26 On
Includes: RLKS spacers & adaptors for RLKVA leg system, Multi-Slide extension ladder rack, conduit.
SKU:710-RSL-00009
COMPACT SLIDE LOADER (CSL) LADDER RACK SYSTEM
CSL26M
The CSL26M is Rhino-Rack's entry point into professional ladder carrying — a fixed-rail system at 2.6m that suits both step and extension ladders. PVC-lined rails protect your ladder from damage on the road, while the compatible ladder roller (LR470 or LR680, sold separately) makes loading and unloading stress-free.
- Rail Length: 2.6m
- Width Options: Narrow (step ladder) / Wide (extension ladder)
- Max Load: 42kg
- Ladder Type: Step & Extension
- Dimensions: 3.28m × 0.23m × 0.16m
- Gross Weight: 16.5kg
- Warranty: 5 Years
- Made in Australia
CSL30M
The CSL30M is ideal for tradespeople who regularly carry full-size extension ladders. At 3.0m, it provides added support for longer spans while maintaining the same robust fixed-rail construction and PVC guide strips. Pair with a Rhino-Rack ladder roller (LR470 or LR680, sold separately) for smooth, safe loading every time.
- Rail Length: 3.0m
- Width Options: Narrow / Wide
- Max Load: 42kg
- Ladder Type: Step & Extension
- Dimensions: 3.28m × 0.23m × 0.16m
- Gross Weight: 18kg
- Warranty: 5 Years
- Made in Australia
CSL35M
For larger vehicles or longer ladders, the CSL35M extends the proven CSL system to 3.5m — giving you greater coverage across the roof and more confidence when transporting full-size extension ladders on vans and dual-cab utes.
- Rail Length: 3.5m
- Width Options: Narrow / Wide
- Max Load: 42kg
- Ladder Type: Step & Extension
- Dimensions: 4.34m × 0.23m × 0.16m
- Gross Weight: 23kg
- Warranty: 5 Years
- Made in Australia
CSL40M
The CSL40M is the longest in the CSL range — built for tradespeople who need to carry large extension ladders on long-wheelbase vans or commercial vehicles. Maximum rail coverage, same trusted construction. Suits extension ladders only. For step ladders, see CSL26M–CSL35M.
- Rail Length: 4.0m
- Width Options: Narrow / Wide
- Max Load: 42kg
- Ladder Type: Extension only
- Dimensions: 4.34m × 0.23m × 0.16m
- Gross Weight: 25kg
- Warranty: 5 Years
- Made in Australia
MULTI-SLIDE(MS) LADDER RACK SYSTEM
MS26M
The MS26M is the starting point in the Multi-Slide range — a 2.6m sliding-support system designed for tradespeople carrying both step and extension ladders on everyday vehicles. The continuous guide pads and rear roller make loading and unloading noticeably smoother than fixed-rail alternatives.
- Rail Length: 2.6m
- Max Load: 42kg
- Ladder Type: Step & Extension
- Dimensions: 3.28m × 0.23m × 0.16m
- Gross Weight: 16kg
- Warranty: 5 Years
- Made in Australia
MS30M
The MS30M extends the Multi-Slide system to 3.0m — the most popular choice for electricians and plumbers carrying full-size extension ladders. Greater rail length means more support across the ladder's span and a more stable load on the road.
- Rail Length: 3.0m
- Max Load: 42kg
- Ladder Type: Step & Extension
- Dimensions: 3.28m × 0.23m × 0.16m
- Gross Weight: 16.16kg
- Warranty: 5 Years
- Made in Australia
MS35M
For larger vans or longer extension ladders, the MS35M steps up to 3.5m of sliding-support rail. The longer span delivers added stability and load distribution — ideal for builders and contractors regularly transporting heavier extension ladders.
- Rail Length: 3.5m
- Max Load: 42kg
- Ladder Type: Step & Extension
- Dimensions: 3.8m × 0.23m × 0.16m
- Gross Weight: 17kg
- Warranty: 5 Years
- Made in Australia
MS40M
The MS40M is the longest Multi-Slide available — 4.0m of continuous guide rail built for long-wheelbase commercial vans and tradespeople who need maximum coverage for large extension ladders. The same trusted sliding system, scaled up for the biggest loads.
- Rail Length: 4.0m
- Max Load: 42kg
- Ladder Type: Extension only
- Dimensions: 4.34m × 0.23m × 0.16m
- Gross Weight: 20.65kg
- Warranty: 5 Years
- Made in Australia
SLIDE OUT LADDER LOADER
T7-SLRS
The Slide Out Ladder Loader builds on the Multi-Slide system with one key upgrade — an extending rail mechanism at the rear that slides clear of the vehicle body before you load or unload. Combining ergonomic design with structural-grade materials, it provides a fast, simple, one-person solution for lifting ladders from high-roof vehicles — reducing the risk of back strain and lifting-related injuries.
- Sliding Mechanism: ✓ Rear extension slide
- Ladder Type: Step & Extension
- Includes: Ladder strap + cable lock
- Ideal for: SUVs, wagons
- Made in Australia: ✓
- Warranty: 5 Years
Key features:
Extending rail slides clear of rear bodywork
Creates pivot point away from vehicle body
Prevents paint and body damage during loading
Includes cable lock for ladder security
Ladder strap included
Recommended for SUVs and station wagons
INTERNAL LADDER RACK(ILR)
ILRRACK
The ILRRACK is the universal internal ladder rack — a height-adjustable system that mounts to the roof interior of your van and stores a ladder up to 1.8m. When not in use, the hanging sections pivot upwards to restore head clearance and maximise usable cargo space.
- Max Ladder Height: 1.8m
- Mounting: Interior van roof
- Adjustable Height
- Pivot-up when not in use
- Warranty: 5 Years
ILRH6GK1
A vehicle-specific internal ladder rack kit engineered for the Toyota HiAce Gen 6. Everything included for a precise, secure fit without modification — protecting your ladder inside the van and freeing up your roof for crossbars, conduit or other trade accessories.
- Vehicle: Toyota HiAce Gen 6
- Max Ladder Height: 1.8m
- Vehicle-specific fit.
- Warranty: 5 Years
ILRHILK1
The iLOAD-specific internal ladder rack kit is purpose-built for the Isuzu iLOAD van — delivering the same secure interior storage with a fitment designed around the iLOAD's interior dimensions and mounting points.
- Vehicle: Isuzu iLOAD
- Max Ladder Height: 1.8m
- Vehicle-specific fit
- Warranty: 5 Years
What Size Ladder Rack Do I Need?
Choosing the right rail length depends on the type and size of your ladder. Use this guide as a starting point, then speak to your nearest Rhino-Rack dealer for a vehicle-specific recommendation.
| Rail Length | Extension Ladder | Step Ladder |
|---|---|---|
| 2.6m | ✓ | ✓ |
| 3.0m | ✓ | ✓ |
| 3.5m | ✓ | ✓ |
| 4.0m | ✓ | ✗ |
Don't Forget Your Conduit
P30-100
The P30-100 is a 3.0m / 9.8ft long, 100mm / 4" diameter conduit carrier. Ribbed end caps screw on and off for easy access to stored cables and pipes. Mounts to Heavy Duty Crossbars via BC2 or BC3 clamp sets. Ideal for electricians and plumbers carrying cables, conduit or small pipe on shorter vehicles.
Includes: Ribbed conduit end caps
Compatible with: BC2, BC3 clamp sets; Heavy Duty Crossbars
P46-100
The P46-100 is a 4.6m / 15ft long, 100mm / 4" diameter conduit carrier — the longest 100mm option in the range. Built-in ribbed end caps provide maximum security on the road and screw off quickly when you arrive on site. Best suited to vans and long-wheelbase vehicles carrying full-length conduit runs. Includes: Ribbed conduit end caps with built-in locking Compatible with: BC2, BC3 clamp sets; Heavy Duty Crossbars
P46-150
The P46-150 is a 4.6m / 15ft long, 150mm / 6" diameter conduit carrier — the largest in the range. Designed for plumbers and builders who need to transport larger diameter pipe or conduit in a single trip. Ribbed end caps screw on and off easily for quick access on site.
Includes: Ribbed conduit end caps
Compatible with: BC2-150, BC3-150 clamp sets; Heavy Duty Crossbars
Complete Your Conduit Setup
TO SUIT EVERY WORKDAY
The STOW iT system starts with the Base Bracket — your core mounting point — which attaches directly to any Pioneer Platform or crossbar. From there, simply swap adaptors to suit whatever you're carrying that day. Light bar, awning, roller, universal holder — one base, endless configurations. No tools. No fuss. Compatible with Zwifloc™ channel nuts for tool-free placement anywhere on your Pioneer Platform or Reconn-Deck bar.
STOW iT Utility Holder (Regular) (RSIT2)
The STOW iT Utility Holder (Regular) mounts directly to your Pioneer Platform or Reconn-Deck bar via Zwifloc™ channel nuts — no tools required. Use it to carry hand tools, pipe cutters, spirit levels or any trade equipment you need quick access to on the job.
STOW iT Utility Holder (Large) (LSIT)
The STOW iT Utility Holder (Large) is the bigger brother — built for longer, bulkier items like high-lift jacks, conduit offcuts, pipe benders or multiple hand tools in a single holder. Mounts the same way via Zwifloc™, swaps out in seconds.
STOW iT Awning Adaptor (BSIT)
The STOW iT Awning Adaptor mounts a Rhino-Rack Batwing or Sunseeker Awning to your Pioneer Platform or crossbar via the STOW iT Base Bracket — giving you quick shelter on-site without permanent mounting.
STOW iT Light Bar Adaptor(ISIT)
Mount a work light bar anywhere on your Pioneer Platform or Rhino-Rack crossbar. The Light Bar Adaptor slides into the STOW iT Base Bracket and locks in place — reposition it in seconds as your setup changes.
STOW iT Universal Adaptor (USIT)
The Universal Adaptor gives you the flexibility to mount almost any compatible Rhino-Rack accessory to the side of your Pioneer Platform or crossbar system via the STOW iT Base Bracket.
STOW iT Roller Adaptor (OSIT)
The STOW iT Roller Adapter provides roller installation flexibility to anywhere on the perimeter of the Pioneer platform or Rhino-Rack crossbars. The Roller Adaptor is used in conjunction with the STOW iT starter kit where it simply slides into the STOW iT Starter Kit base bracket wherever it is mounted.
STOW iT Base Bracket (SSIT2)
The STOW iT base bracket is an accessory bracket that offers versatility like no other. Simply fix the brackets to the perimeter channels of a Pioneer platform or Rhino-Rack crossbar, and you have the convenience and flexibility to add, remove or swap accessories with ease to suit your needs. Adaptors sold separately.
TECHNOLOGY
The patented Zwifloc™ fastening system lets you place compatible accessories anywhere on your Pioneer Platform or Reconn-Deck bar — without moving anything else around. The hardware simply drops into the channel and locks with a twist. No need to slide in from the end. No need to reposition other gear. Just place it where you need it and get to work.
How it works:
Step 1 — Drop In
Simply place the Zwifloc™ channel nut into any point along the Pioneer Platform or Reconn-Deck bar channel. No end entry needed.
Step 2 — Twist to Engage
Tighten the bolt. The high-tensile M6 nut rotates within the housing cage to lock under the channel lip.
Step 3 — Done
Your accessory is locked in place. To reposition, simply loosen and slide — or remove entirely in seconds.
Products using Zwifloc™
AWNING RANGE
Sunseeker Awning 2m (32143)
The Sunseeker 2m is the compact, no-fuss option for quick on-site shade. Mounts to the side of your vehicle and extends 2m from the edge — providing 4m²/43ft² of coverage whenever you need it. One person setup, no ropes, no tripping hazards.
- Coverage: 4m² / 43ft²
- Extension: 2m / 78" from edge of vehicle
- Fabric: 280gsm ripstop polycotton
- Waterhead: 2000mm
- UV protection: UV50+
- Compatible with Zwifloc™
Sunseeker Awning 2.5m (32144)
The Sunseeker 2.5m steps up the coverage without adding complexity — extending 2.5m from the edge of your vehicle for 5m²/53ft² of quick, reliable shade. Same one-person operation, same no-ropes setup, just more room to work or rest under.
- Coverage: 5m² / 53ft²
- Extension: 2.5m / 98" from edge of vehicle
- Fabric: 280gsm ripstop polycotton
- Waterhead: 2000mm
- UV protection: UV50+
- Compatible with Zwifloc™
Sunseeker Freestanding Awning 2m (32148)
The Freestanding Sunseeker 2m gives you the same 4m²/43ft² coverage as the standard Sunseeker — with the added ability to stand independently from the vehicle. Perfect for job sites where the van needs to move but the shade needs to stay.
- Coverage: 4m² / 43ft²
- Extension: 2m / 78" from edge of vehicle when opened
- Freestanding: ✓
- Fabric: 280gsm ripstop polycotton
- Waterhead: 2000mm
- UV protection: UV50+
- Compatible with Zwifloc™
Freestanding Batwing 180°(32147)
The Batwing 180° deploys in seconds to provide 8.4m²/90ft² of coverage from one side and the rear of your vehicle — enough for a full crew to shelter under. Freestanding legs mean it stays up even when the vehicle moves. Built for worksites, built to last.
- Coverage: 8.4m² / 90ft²
- Extension: up to 2m / 78" from edge of vehicle
- Freestanding: ✓
- Fabric: 280gsm ripstop polycotton
- Waterhead: 2000mm
- UV protection: UV50+
- Compatible with Zwifloc™
Freestanding Batwing 270° (Left)(32145)
The ultimate on-site shelter. The Batwing 270° wraps around the side and rear of your vehicle delivering 12.3m²/132ft² of coverage — enough for a whole crew. Available in left or right configuration. Freestanding legs keep it solid even on uneven ground.
- Coverage: 12.3m² / 132ft²
- Extension: up to 2m / 78" from edge of vehicle
- Wraps: side + rear of vehicle
- Options: Left (32145) or Right (32146)
- Freestanding: ✓
- Fabric: 280gsm ripstop polycotton
- Waterhead: 2000mm
- UV protection: UV50+
- Compatible with Zwifloc™
Freestanding Batwing 270° (Right)(32146)
The ultimate on-site shelter. The Batwing 270° wraps around the side and rear of your vehicle delivering 12.3m²/132ft² of coverage — enough for a whole crew. Available in left or right configuration. Freestanding legs keep it solid even on uneven ground.
Key specs:
- Coverage: 12.3m² / 132ft²
- Extension: up to 2m / 78" from edge of vehicle
- Wraps: side + rear of vehicle
- Freestanding: ✓
- Fabric: 280gsm ripstop polycotton
- Waterhead: 2000mm
- UV protection: UV50+
- Compatible with Zwifloc™
Browse the complete 2026/2027 Rhino-Rack Trade Catalogue — everything you need to specify, quote and order the right trade solution for any vehicle.
View Catalogue Download Catalogue