Ezy Anchor Starter Pack - With Carry Bag

Part No: EASP

The Starter Pack Plus is designed for Caravanners, Campers and others who want to start with a multipurpose pack that covers the use of the Ezy Anchors in the hard red and gravelly dirt of the Outback and also sandy loam soils such as Coastal Caravan parks.

(All prices are listed in USD & exclude freight & fitting charges.)

Product Details

Overview

Package Includes:

8 x Ezy Anchors

4 x 200mm Long Outback Screws

4 x 280mm Long Coastal Screws

1 x Torx T50 Driver 

1 x Carry Bag



Installation:

Take your cordless drill or impact driver

Connect the Torx driver bit to the drill/driver and secure in the chuck

Pick up your Ezy Anchor with screw in position through the Ezy Anchor

Connect your guy rope to the hook

Hold the guy rope and hook together with your guiding hand

Pick up the drill and driver in your driving hand

Insert the Torx driver into the head of the screw

Place drill in forward drilling position

Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.

Installation complete

Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.

 

Removal:

With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.

Hold the hook and guy rope in one hand, place drill in reverse and screw out.

Removal complete

*In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.

**Remember to regularly charge your drill or impact driver battery.

 

 

Shipping & Delivery

New flat rate shipping options

ORDER SUBTOTAL DELIVERY FEE
Under $100 $15 shipping
$100.01 - $300 $25 shipping
$300.01 - $1,000 $50 shipping
$1,000.01+ $100 shipping

See our Shipping Policy for full details.

Overview

Package Includes:

8 x Ezy Anchors

4 x 200mm Long Outback Screws

4 x 280mm Long Coastal Screws

1 x Torx T50 Driver 

1 x Carry Bag



Installation:

Take your cordless drill or impact driver

Connect the Torx driver bit to the drill/driver and secure in the chuck

Pick up your Ezy Anchor with screw in position through the Ezy Anchor

Connect your guy rope to the hook

Hold the guy rope and hook together with your guiding hand

Pick up the drill and driver in your driving hand

Insert the Torx driver into the head of the screw

Place drill in forward drilling position

Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.

Installation complete

Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.

 

Removal:

With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.

Hold the hook and guy rope in one hand, place drill in reverse and screw out.

Removal complete

*In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.

**Remember to regularly charge your drill or impact driver battery.

 

 

Package length
13.39 inch
Package width
6.30 inch
Package height
2.76 inch

Shipping & Delivery

New flat rate shipping options

ORDER SUBTOTAL DELIVERY FEE
Under $100 $15 shipping
$100.01 - $300 $25 shipping
$300.01 - $1,000 $50 shipping
$1,000.01+ $100 shipping

See our Shipping Policy for full details.