Filters
Price
Reset Filters
products (1 - 24 of 30)

RLKS1
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
7,00 €
(Price inc VAT)
RLKS5
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
32,00 €
(Price inc VAT)
ARB-HD
Using an ARB Ute Post? Wish you could replace the bar with a Rhino-Rack Heavy Duty Bar (sold separately) so you could fit it out with Rhino-Rack's wid...
12,00 €
(Price inc VAT)
ARB-AERO
Using an ARB Ute Post? Wish you could replace the bar with a Rhino-Rack Vortex Bar (sold separately) so you could fit it out with Rhino-Rack's wide ra...
12,00 €
(Price inc VAT)
CXBS2
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of 4 spacers will give you an extra 12mm of height to work with.
13,00 €
(Price inc VAT)
CXBS3
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of 6 spacers will give you an extra 18mm of height to work with.
17,00 €
(Price inc VAT)
CXBS4
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of spacers will give you an extra 24mm of height to work with.
20,00 €
(Price inc VAT)
CXBS1
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This pair of spacers will give you an extra 6mm of height to work with.
8,00 €
(Price inc VAT)
LHSPAIR
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.
11,00 €
(Price inc VAT)
LHS2PAIR
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.
20,00 €
(Price inc VAT)
HDS05
The Heavy Duty ROC25 Spacer (5mm) allows you to fit a Rhino-Rack Heavy Duty Bar to the RLKVO leg. This kit fits 1 bar.
4,00 €
(Price inc VAT)
RLK2500HALF-JB
Allows you to set the height of your ute cabin mounted support bar so that it's level with your utes rear mounted posts or canopy racks.
76,00 €
(Price inc VAT)
PLHSPAIR
The Pioneer Leg Height Spacers are used to level a Pioneer system on a vehicle.
7,00 €
(Price inc VAT)
PLHS1
The PLHS1 Pioneer Leg Height Spacer is designed to fit the Pioneer Roof Trays onto the Rhino-Rack Backbone system developed for the JEEP JK Wrangler.
26,00 €
(Price inc VAT)
PLHS3
The Pioneer Leg Height Spacers (5mm) used to level a Pioneer system on a vehicle.
12,00 €
(Price inc VAT)
LHSPIV
Pivot Height Spacers are blocks that are placed between the leg unit and the cross bar to correct the cross bar angle on vehicles that utilize curved...
20,00 €
(Price inc VAT)
QMHD10
The Quick Mount™ Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. Sold as a pair of 2.
12,00 €
(Price inc VAT)
QMHD15
The Quick Mount™ Heavy Spacer (15mm) allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.
12,00 €
(Price inc VAT)
QMHD20
The Quick Mount™ Heavy Spacer (20mm) allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.
16,00 €
(Price inc VAT)
QMHD25
The Quick Mount™ Heavy Spacer (25mm) allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.
18,00 €
(Price inc VAT)
QMHD30
The Quick Mount™ Heavy Spacer (30mm) allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.
20,00 €
(Price inc VAT)
QMHD05
The Quick Mount™ Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.
8,00 €
(Price inc VAT)
QMVA10
The Quick Mount™ Vortex Spacer (10mm) allows you to fit the Rhino-Rack Vortex Bars to RLT600, RCH and RCL legs. Sold as a pair of 2 which fits 1...
8,00 €
(Price inc VAT)
QMVA15
The Quick Mount™ Vortex Spacer (15mm) allows you to fit the Rhino-Rack Vortex Bars to RLT600, RCH and RCL legs. Sold as a pair of 2 which fits 1...
10,00 €
(Price inc VAT)